Safety precautions for open roller gates, Warning sign placement – LiftMaster SL575 Heavy-Duty Commercial Slide Gate Operator User Manual

Page 8

Advertising
background image

8

NOT FOR USE AS PEDESTRIAN PASSAGE! This operator is
intended for vehicular use only. To prevent INJURY to
pedestrians, a separate pedestrian access should be supplied,
visible from the gate. Locate the pedestrian access where there is
not a chance of INJURY at any point during full movement of the
gate.

DO NOT MOUNT ACCESSORIES THAT ARE ACCESSIBLE
THROUGH GATE!

WARNING SIGN PLACEMENT

To prevent SERIOUS INJURY or DEATH from a moving gate:
• Install Warning signs on EACH side of gate in PLAIN VIEW.
• Permanently secure each Warning sign in a suitable manner

using fastening holes.

Moving Gate Can Cause

Injury or Death

KEEP CLEAR! Gate may move at any
time without prior warning.

Do not let children operate the gate or
play in the gate area.

This entrance is for vehicles only.
Pedestrians must use separate entrance

SAFETY PRECAUTIONS FOR OPEN ROLLER GATES

• Injuries occur when people get their hands or feet caught

between the top or bottom of the gate and the gate roller.
These potential pinch-points should be guarded against at
ALL times. Enclosed style gate tracks are available for
refitting of these rollers from many fence suppliers. Also,
roller guards are available for installing over the rollers.

• UL325 requires that, when used, contact sensors shall be

located at the leading edge, trailing edge and be post
mounted both inside and outside of a vehicular horizontal
slide gate. Non-contact sensors such as photo eyes MUST
protect during both open and close gate cycles.

• Injuries occur when people put their hands and arms

through openings in the grill while the gate is operating.
They cannot retract their arm and it gets caught between the
moving gate grill and the stationary fence post or fence. This
potential hazard can be averted by placing a 4' (1.2 m)
screen mesh on the gate to prevent access through openings
anywhere the gate may travel. See Safety Brochure for
details. To prevent entrapment injuries, mount controls at
least 6' (1.8 m) from the gate or ANY moving parts of the
gate.

ATTENTION

AVERTISSEMENT

AVERTISSEMENT

AVERTISSEMENT

WARNING

WARNING

CAUTION

WARNING

WARNING

PRECAUCIÓN

ADVERTENCIA

ADVERTENCIA

ADVERTENCIA

ATTENTION

AVERTISSEMENT

AVERTISSEMENT

AVERTISSEMENT

WARNING

WARNING

CAUTION

WARNING

WARNING

PRECAUCIÓN

ADVERTENCIA

ADVERTENCIA

ADVERTENCIA

Gate Edge on Rear
of Gate for Open
Direction

Gate Edge on Fence Post
for Open Direction

Gate Edge on
Leading Edge of Gate for
Close Direction

Photo Beam
for Open
Direction

Photo Beam for
Close Direction

UNIT

Additional Post Mounted Gate
Edge for Close Direction

Additional Post Mounted Gate
Edge for Open Direction

Pinch-Point
Hazard

Pinch-Point
Hazard

Gate Edge for
Close Direction

Gate Edge for
Close Direction

Gate Edge for
Open Direction

Always Test Gate Edges and

Photo Beams Anytime They Are

Adjusted or Serviced

Gate Edge

Vertical Post Placed on Both
Sides of the Exposed Rollers
Can Prevent Hands From
Reaching These Pinch-Points

Advertising