Teka NFT 370 - Manual (Page 16)

About the fridge storage compartment
Use of the foldaway shelf
Fig. shows the extended state of the foldaway shelf in which
you can put lower food containers.
Fig.
shows the folded state of the foldaway shelf in which
you can put higher food containers.
To fold the shelf from state
to state , simply push structure
A upwards, and push structure B inward in the direction of the
arrow shown in the figure.
To extend the shelf from state
to state , push structure A
upwards, and pull structure B in the direction of the arrow
shown in the figure.
Use of the wire wine holder
Fig. shows the folded state of the wire wine holder. In this
state large space can be spared.
Fig.
shows the extended state of the wire wine holder. In
this state it can hold various wines.
To extend it from state
to state , simply pull the wire
down.The maximum load of the bottle holder is 10 kg.
To fold it from state
to state , simply push the wire up.
Note
make sure to keep the two ends of a shelf on the same level.
Otherwise it may fall or the food on it may dump.
Recommended storage areas for various foods
As cold air circulates inside the refrigerator, there is
temperature difference inside the fridge storage
compartment. Different foods should be placed in
different areas according to their properties.
Eggs, butter, cheese and etc.
Drinks, canned food and etc.
Seasonings and pickled food
Beverages, canned food, cake, etc.
Wine, champagne, etc.
Milk, cheese, etc
Cooked meat, fresh fish and meat, etc.
Fruit, vegetables, salad, etc.
Lamp in the fridge storage compartment and its replacement
Parameters of the lamp: 12V, max 5W(the power depends on the model). The lamp
adopts LED as its light source, featuring low energy consumption and long service life. If
there is any abnormality, please contact the after-sales service personnel.
14