Teka NFT 370 - Manual (Page 9)

Placing environment
Leveling of the cabinet
The refrigerator should be placed on a flat and
solid surface. If the refrigerator is placed on a
pedestal, flat, strong and fire-resistant materials
must be used. Never use the foam packing
material for a pedestal. If the refrigerator is
slightly unstable, you can prolong or shorten the
adjustable foots of the refrigerator by turning
them clockwise or counterclockwise. Never place the refrigerator in a damp area
or a location where it may be splashed with
water. Clean and dry any water splashes and
stains with soft cloth.
The direction shown is clockwise
The refrigerator should be placed in a well-
ventilated place not far from a drink water
source. A space of at least 20cm above and
10cm around the refrigerator must be kept.
To the
upper Distance
To the
backside
To right
or left
The appliance must be positioned so that the plug is accessible.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear
of obstruction. Warning:Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartments of the appliance,
unless they are of the type recommended by the manufacturer.
This appliance is not intended for use by persons (including children) with reduced
physical,sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Warning:
Warning:
Warning:
Warning:
Warning:
6