Teledyne LeCroy WaveAce - Manual (Page 68)

Getting Started Manual
WA-GSM-E RevB 68
2. Press the Type option button and select CSV.
3. Press the Data Depth option button and select Maximum or
Displayed.
4. Press the Para Save option button and select On or Off.
5. Press the Save option button to save the .CSV file.
6. The SAVE ALL screen is shown. Refer to Using the SAVE ALL Screen
(on page 75) to continue saving to your USB memory device.
PLEASE NOTE THE FOLLOWING:

The Recall option is excluded from Save/Recall menus when Picture
or CSV is selected as the Type.

The Load option is disabled (grayed-out) on menus inside the SAVE
ALL screen when Pictures or CSV file types are selected as Type.
Saving and Printing Waveform Pictures
You can save a waveform image (.BMP) file to a USB memory device or
print a waveform image to a USB-connected printer.
Once you have set up your print options and connected the device to the
USB port, you can press the Print front panel button to save or print the
image.
Note: Most USB printers supporting direct printing through Type A USB
port connections are compatible with your WaveAce oscilloscope. Refer
to your printer's product documentation to verify compatibility.
1. Press the Save/Recall front panel button. The SAVE/REC flyout
menu opens.