Teledyne LeCroy WaveAce - Manual (Page 80)

Getting Started Manual
WA-GSM-E RevB 80

As the screen indicates, disconnect anything plugged into
receptacles (except for the power cable) before performing a self-
calibration.

Press the SINGLE front panel button to begin the self-calibration or
the RUN/STOP front panel button to exit the Do Self Cal screen.
After pressing the SINGLE front panel button, a status bar shows the
self-calibration progress for each channel on the instrument.
Press the SINGLE front panel button when self-calibration is
complete.
2. Press the Do Self Test option button to perform a self-test.