Teledyne LeCroy ZS2500 - Manual (Page 14)

ZS Series High-Impedance, Active Probes
Leads
While longer leads provide greater flexibility when connecting the probe to a
circuit, the added inductance may degrade the fidelity of high frequency signals.
See Section 4 for additional information.
Short and Long
Straight Pin Lead
These leads have a socket on one end and a square pin
on the other to connect to the input or ground socket
of the probe body, and may be used for general
purpose probing.
Short and Long Right
Angle Pin Lead
These leads have a socket on one end with a right
angle and a square pin on the other to connect to the
input or ground socket of the probe body, and may be
used for general purpose probing.
Y Lead Adapter This lead is used for both ground and input lead
simultaneously. It has two sockets on one end and two
square pins on the other and may be used for general
purpose probing.
Grabbers
Micro- and Mini-
Grabbers
The micro-grabbers are ideal for connecting to small
IC legs or pins very tightly spaced.
8 924282-00 Rev A