Teledyne LeCroy SierraNet M168 User Manual Ver.1.40 - Manual (Page 138)

Teledyne LeCroy Advanced Mode (User‐Defined)
136 SierraNet M168 User Manual
Figure 2.87: Setting Triggers
6. Define each selected pattern in the same way as in Easy Mode, as described in
“Ethernet Patterns (Easy Mode)” on page 65 . To use a timer, define it first.
Note:
You can copy a frame from the spreadsheet view and paste it for triggering.
Note:
You can set a timer for any If or Else If condition.
7. Enter a value for the number of occurrences before trigger in the Count field, up to
a maximum of 65535 occurrences.