Warner Electric ZRC Clutch_ARC Top Load - Manual (Page 15)

Warner Electric • 800-825-9050 P-2018 • ZRC/ARC 15
Materials Requirements
Anti-Seize Compound
• Apply to spindle at time of headset installation Cleaning Solution
Cleaning Solution
• Alcohol based cleaning solvent used to wipe and clean parts during rebuild.
Grease
• Citgo Clarion Food Grade Grease, HTEP NLGI No. 2 Grade used to lubricate headset.
Loctite
• Blue Removable - 242 threadlocker used to secure components within the headset.
Epoxy
• Five minute epoxy – Amber, Devcon dev-pak adhesive 14270 used to fill counter-bores in the magnet
plate.
Information for Ordering Spare Parts
It is important to stock spare parts on hand to avoid unnecessary downtime. Warner recommends that you
stock at least two spare headsets per machine and a few bearing and magnet rebuild kits so that you have the
necessary parts on hand if you need them.
How to order spare parts – required information:
1. Purchase Order Number.
2. Warner headset model number/part number OR serial number (only on models manufactured July 2007
and later).
3. Warner Component or Kit Part Number.
4. Preferred distributor to order from. All orders will be routed through local distribution. Pricing and lead time
can be quoted by calling the Manufacturing Facility at (888) 350-1891.