Programming, Entering presets – Warner Electric CBC-1000 User Manual
Page 12
10
Warner Electric • 800-825-9050
P-275 • 819-0496
Programming
View Presets and Values
The six function keys may all be viewed during the RUN mode. To view their values, press the desired func-
tion key and the value is displayed with the corresponding display annunciator. The controller process contin-
ues without interruption.
Entering Presets
The three presets (MOV PST, E.W., and BCH PST) may also be changed during the RUN mode provided that
programming line 6 (panel lock) is programmed “off”. To edit, press the desired preset function key, next
press the EDIT key followed by the CLEAR key. Enter the new value using the numeric keys, then press the
EDIT key to exit the edit mode and to replace the existing value in memory. The CBC-1000 will use the new
number entered after the edit mode is exited.
Press
Press
Press
Press
Press
Press
to display the current length or position (up to six digits).
to display the move preset (up to six digits).
to display the early warning preset (up to four digits).
to display the batch counter (up to six digits).
to display the batch counter preset (up to six digits).
to display the average braking distance (up to four digits).
1
COUNT
2
3
6
7
8
MOV PST
E.W.
BATCH
BCH PST
BRK DIS
Move
Preset
2
MOV PST
2
MOV PST
EDIT
EDIT
EDIT
EDIT
EDIT
EDIT
EDIT
EDIT
3
E.W.
7
BCH PST
1
6
COUNT
RESET
CLEAR
RESET
CLEAR
RESET
CLEAR
RESET
CLEAR
BATCH
RESET
CLEAR
Early
Warning
Batch
Preset
Batch
Counter
Reset
System
Home
To home the system: Press
then press
.
Press
, then press
, and press
, now enter a new value using the numeric keys, then press
.
Press
Press
Press
, then press
, then press
, then press
, and press
, and press
, and press
enter a new value using the numeric keys, then press
.
enter a new value using the numeric keys, then press
.
or to change the value incrementally. Then press
.
, now
To manually reset the batch counter.
, then press
.
Press
Or