Asus Barebone System T2-PH2 - Manual (Page 25)

2-5 ASUS T2-PH2
2.5 Installing a CPU
The ASUS motherboard comes with a surface mount LGA775 socket
designed for the Intel ® Pentium ® 4 processor in the 775-land package.
2.5.1 Removing the CPU fan and heatsink assembly
The system package includes a pre-installed proprietary CPU fan and
heatsink assembly to ensure optimum thermal condition and performance.
You must remove the CPU fan and heatsink assembly before you can install
a CPU.
To remove the CPU fan and heatsink assembly:
1. Disconnect the CPU fan cable from the CPU fan connector on the
motherboard.
2. Using a Phillips screw driver, remove and set aside the four screws
that secure the fan and heatsink assembly to the motherboard.
3. Carefully lift the fan and heatsink assembly, and set it aside.
DO NOT replace the proprietary CPU fan and heatsink with other models.
2
2
2
2
1
3