Asus Barebone System T2-PH2 - Manual (Page 98)

5-26 Chapter 5: BIOS setup
5.4.6 Onboard Devices Configuration
Configure Win627EHG Super IO Chipset
AC’97 Controller [Enabled]
Onboard 1394 Controller [Enabled]
Onboard PCIEX GbE LAN [Enabled]
LAN Option ROM [Disabled]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378]
Parallel Port Mode [ECP]
ECP Mode DMA Channel [DMA3]
Parallel Port IRQ [IRQ7]
Onboard Game/MIDI Port [Disabled]
ACʼ97 Controller [Enabled]
Enables or disables the ACʼ97 CODEC.
Configuration options: [Enabled] [Disabled]
Onboard 1394 Controller [Enabled]
Enables or disables the onboard IEEE 1394a controller.
Configuration options: [Enabled] [Disabled]
OnBoard PCIEX GbE LAN [Enabled]
Allows you to enable or disable the onboard PCI Express Gigabit LAN
controller. Configuration options: [Enabled] [Disabled]
LAN Option ROM [Disabled]
Allows you to enable or disable the option ROM in the onboard PCI
Express Gigabit LAN controller. This item appears only when the
Onboard PCIEX GbE LAN item is set to Enabled.
Configuration options: [Disabled] [Enabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4]
[2E8/IRQ3]
Enable or disable
Configure DRAM Timing
by SPD.