Playing mp3/wma data, Scanning programmes, Quick search – Alpine CDA-W560E User Manual

Page 12

Advertising
background image

10

-EN

Playing MP3/WMA Data

This product can playback CDs containing both CD and MP3/WMA
data. However, in some situations (some enhanced CDs), playback
may be difficult. For these special cases, you can select playback of
CD data only. When a disc contains both CD or the MP3/WMA data,
playback starts from the CD data portion of the disc.

1

Press FUNCTION/SETUP to select the SETUP
mode
*.

* See “About SETUP” on Page 6.

2

Press / or - to select the CD-DA mode.

3

Press -/J / ENT. to set the disc selection range.

(Initial setting)

4

After completing the setting, press FUNCTION/
SETUP to return to the normal mode.

• Perform this setting before inserting a disc. If a disc has already

been inserted, perform the setting after you remove the disc. (If you
use an MP3 changer, you have to change discs.)

Scanning Programmes

The first 10 seconds of each track (file) will be played back in
succession.

1

Press FUNCTION/SETUP to select the FUNCTION
mode.

2

Press / or - to select the SCAN mode, then press
-/J / ENT..

The mode that is blinking at the centre of the display is the
selected mode.

3

Press / or - to select ON, then press -/J / ENT..

• When you have found a desired track for listening, switch the

function OFF with the above procedure.

• The FUNCTION mode will be cancelled when an operation has

not been performed in 10 seconds.

The sampling rate and the bit rate
(frame display) are alternately
displayed.

Quick Search

You can search for tracks (files).

Press and hold

or

to select the desired

track (file number).

The selected track is played back immediately.

• Holding down

or

causes the files to change

continuously and removing your finger starts playing that track.

MP3/WMA Play Display

The folder number, file number, sampling rate, and bit rate
will be displayed as described below.

As the root folder number is displayed as 1, when there is no
file in the root folder, the first folder is displayed as 2 and
played back.

• Press TITLE to switch the display. Please see “Displaying the

Title/Text” (on Page 18) for information about display switching.

Folder number display

File number display

Sampling rate display

Folder number display

File number display

Bit rate display

44.1

kHZ

01 03

160

kbps

01 03

CD-DA ONLY

CD-DA & MP3/WMA

ON OFF

FUNCTION

SETUP

NORMAL

mode

mode

mode

Advertising
This manual is related to the following products: