Alpine CDA-W560E - Manual (Page 13)

11
-EN
M.I.X. (Random Play)
The tracks (files) on the disc will be played back in random sequence.
1
Press FUNCTION/SETUP to select the FUNCTION
mode.
2
Press / or - to select the M.I.X. mode, then press
-/J / ENT..
The mode that is blinking at the centre of the display is the
selected mode.
3
Press / or - to select M.I.X. ONE or M.I.X. FLDR,
then press -/J / ENT..
The mode that is blinking at the centre of the display is the
selected mode.
M.I.X. FLDR : Only files in a folder are played back in
random sequence.
M.I.X. ONE : Files in a disc are played back in random
sequence.
If an MP3 compatible CD changer is connected,
all files in a disc are played back in random
sequence, and playback shifts to the next disc.
4
To cancel, select M.I.X. OFF with the above
procedure.
• The FUNCTION mode will be cancelled when an operation has
not been performed in 10 seconds.
Repeat Play
The track (file) will be played repeatedly.
1
Press FUNCTION/SETUP to select the FUNCTION
mode.
2
Press / or - to select the REPEAT mode, then
press -/J / ENT..
The mode that is blinking at the centre of the display is the
selected mode.
3
Press / or - to select the RPT mode, then press
-/J / ENT..
The mode that is blinking at the centre of the display is the
selected mode.
(* When an MP3 compatible CD changer is connected.)
RPT ONE : Only a file is repeatedly played back
RPT FLDR : Only files in a folder are repeatedly played
back
RPT ALL : A disc is repeatedly played back
4
To cancel, select RPT OFF with the above
procedure.
• The FUNCTION mode will be cancelled when an operation has
not been performed in 10 seconds.
FUNCTION SETUP NORMAL
mode mode mode
M.I.X. FLDR M.I.X. ONE M.I.X. OFF
FUNCTION SETUP NORMAL
mode mode mode
RPT ONE RPT ALL* RPT FLDR RPT OFF