Alpine CDA-W560E - Manual (Page 19)

17
-EN
Tuning to Preset Stations
1
Press BAND to select the band.
2
Press / or - to select the preset number. The
selected broadcast station will be received.
Preset number display
(Display of the received broadcast station stored in preset
numbers “1” to “6”.)
• The ST indicator appears on the display when a stereo FM station
is tuned in.
Station Title Search Function
If titles for radio stations are entered, you can search for a radio
station from its title.
1
Press (SEARCH) in TUNER mode to switch to
Title Search mode.
The first title input blinks in the display.
2
Press / or - to select the desired title within 10
seconds.
3
Press -/J / ENT. to receive the frequency of the
selected title.
• Title Search mode will be cancelled by pressing (SEARCH) or
if an operation has not been performed in 10 seconds.
• If a station has no title, “NO TITLE” is displayed for 2 seconds.
FM1 FM2 AM
FM1- 1 87.50 MHz
CD Changer Operation
(Optional)
Controlling CD Changer
1
Press SOURCE/POWER to set the changer mode.
2
When selecting the disc number, press / or - to
select the desired disc.
3
Press g , f or , to select the
track for listening.
4
Turn the Rotary encoder and adjust the volume
(0 to 35).
5
Press -/J / ENT. to pause playback.
Press -/J / ENT. again to start playback.
• Changer operation can be controlled in the same way as the built-
in CD or MP3. (Please see Pages 7 to 13.)
• Pressing BAND in the CD/Changer mode will change the disc
mode.
• This unit uses the Versatile Link Terminal (KCA-410C) and allows
product selection by pressing BAND when 2 changers or other
equipment is connected.
Rotary encoder
SOURCE/POWER
f
g
/ / -
-/J / ENT.
TUNER TAPE CD CHANGER*
(* Only when the changer is connected)
BAND