Alpine CDA-W560E - Manual (Page 18)

16
-EN
Radio Operation
Listening to Radio
1
Press SOURCE/POWER to select the TUNER
mode.
The aerial will extend when the TUNER mode is set. (Only
on cars equipped with a power aerial.)
2
Press BAND to select the band.
3
Press g , f or , to search for a
desired broadcast station (frequency).
g f: Manual mode
Press and hold to change the
frequency continuously.
: Local mode (SEEK)
: Distance mode (DX SEEK)
(Press and hold)
• Manual mode:
The frequency is manually tuned in steps (Manual tuning).
• Local mode:
Only strong stations will be automatically tuned in (Automatic Seek
Tuning).
• Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Manual Storing of Station Presets
1
See “Listening to Radio” and set the frequency to
that of the desired broadcast station.
2
Press FOLDER/PRESET and within 10 seconds
press / or -, select
P-MEMO mode, and press
-/J / ENT..
3
Within 10 seconds press / or -, select the
number (1 to 6) that you would like to store, and
press -/J / ENT..
The blinking display will change to steady and the
broadcast station will be stored.
• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a
station, the current station will be cleared and replaced with the
new station.
Automatic Memory of Station Presets
1
Press BAND to display the band you wish to
receive.
2
Press FOLDER/PRESET and within 10 seconds
press / or -, select
A-MEMO mode, and press
-/J / ENT..
The tuner will automatically seek and store 6 strong
stations in the selected band. They will be stored into
buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in preset location no. 1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
SOURCE/POWER
FOLDER/PRESET
BAND
FM1 FM2 AM
P-MEMO A-MEMO
FM1-- 3 FM1-- 3
FM1 FM2 AM
P-MEMO A-MEMO
f
g
/ / -
-/J / ENT.
TUNER TAPE CD CHANGER*
(* Only when the changer is connected)
(SEARCH)