Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 31)

Hybrid Terminal Block Hardware Manual
3-6
3.2.1 Wiring Requirements
„Power Cord and Input/Output cables Specifications
‹ Power Cord
1 mm
2
to 1.5mm
2
(AWG 18 and AWG 16). Use the shortest wire length possible. The grounding wire should
be 1.50 mm
2
(AWG 16).
‹ I/O cables
0.20 mm
2
to 1.31 mm
2
, (AWG 24 to AWG 16).
(accepts up to two wires fitted with cable ends or tags)
Power supply
section
Ø 3.5 mm [0.14 in.]
C
N·m 0.6
In/Output terminal
connector
Ø 2.5 mm [0.10 in.]
N·m 0.4