Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 7)

6
UL/c-UL/CSA Approval
This unit is UL/c-UL/CSA listed product: (UL File No. E210412, CSA File No. 240854)
This product conforms to the following standards:
• UL508
Industrial Control Equipment
• UL1604
Electrical Equipment for Use in Class I and II, Division 2, and Class III Hazardous (classified) Locations
• CSA-C22.2 No.142-M1987
Standard for Process Control Equipment
• CSA-C22.2 No.213-M1987
Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations
Warning - Explosion Hazard - This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D or nonhazard-
ous locations only.
Warning - Explosion Hazard - Substitution of components may impair suitability for Class I, Division 2 compliance.
Warning - Explosion Hazard - Do not disconnect equipment unless power has been switched off or the area is known to be
nonhazardous.
CE Marking
This unit is CE marked product that conforms to EMC directives, EN55011 Class A and EN61131-2.