4 canopen features, 5 canopen standards, 4 canopen features -3 – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 12: 5 canopen standards -3
Advertising
Chapter 1 Introduction
1-3
1.1.4
CANopen Features
•
open fieldbus (specifications have been released),
•
maximum communication speed of 1Mbits/s,
•
noise resistance improved by the resend process of the hardware,
•
interoperability and interchangeability of devices,
•
supported by a large number of international manufacturers (approximately 500 member companies),
•
access to all device parameters,
•
supports cyclic communication and acyclic communication (event-driven), thereby reducing bus data
volume and increasing response speed.
1.1.5
CANopen Standards
CANopen specifications are defined by the CiA group and can be accessed on the group site at
http://www.can-cia.org/. The sourcecodes for master and slave devices are available from the various
suppliers.
Advertising
This manual is related to the following products: