Proface PS4800 - 19 Panel PC" - Manual (Page 16)

PS-4000B Series User Manual
16
Federal Communications Commission Radio Frequency Interference Statement
- For U.S.A.
FCC Radio Interference Information
This equipment has been tested and found to comply with the Federal
Communications Commission (FCC) limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause or be subject to interference
with radio communications. To minimize the possibility of electromagnetic
interference in your application, observe the following two rules:
z Install and operate the PS-B unit in such a manner that it does not radiate
sufficient electromagnetic energy to cause interference in nearby devices.
z Install and test the PS-B unit to ensure that the electromagnetic energy generated
by nearby devices does not interfere with the PS-B unit's operation.
WARNING
ELECTROMAGNETIC / RADIO INTERFERENCE
Electromagnetic radiation may disrupt the PS-B unit's operations, leading to
unintended equipment operation. If electromagnetic interference is detected:
z Increase the distance between the PS-B unit and the interfering equipment.
z Reorient the PS-B unit and the interfering equipment.
z Reroute power and communication lines to the PS-B unit and the interfering
equipment.
z Connect the PS-B unit and the interfering equipment to different power supplies.
z Always use shielded cables when connecting the PS-B unit to a peripheral
device or another computer.
Failure to follow these instructions can result in death, serious injury, or
equipment damage.