Integrated device configuration – Proface APL3000B - Node Box PC User Manual
Page 49
PL3000 Series Reference Manual
2-18
Integrated Device Configuration
Specifies the settings for the integrated devices. Point the cursor to [Integrated Device Configuration] on the
[Advanced] screen and press the [Enter] Key to display the following screen.
I/O Device Configuration
Point the cursor to [I/O Device Configuration] and press the [Enter] Key to go to the set-up screen for the I/O
addresses and interrupt Nos. of the integrated devices.
PCI Configuration
Point the cursor to [PCI Configuration] and press the [Enter] Key to go to the PCI resource set-up screen.
USB Controller Configuration
Point the cursor to [USB Configuration] and press the [Enter] Key to go to the USB controller set-up screen.
SATA Operational Mode
Specifies the operation mode of the SATA controller.
[Compatible]
Legacy mode is used.
[Enhanced]
Native mode is used.
SEE
I/O Device Configuration (page2-20)
SEE
SEE