4 checking the status of the pl being monitored, 1 description, 2 setup procedure – Proface APL3000B - Node Box PC User Manual
Page 77: 1 description -16, 2 setup procedure -16, Checking the status of the pl being monitored
PL3000 Series Reference Manual
3-16
3.4
Checking the Status of the PL Being Monitored
3.4.1
Description
Check the status of the PL being monitored with the RAS features from the System Monitor screen.
You can also use this screen to check error/alert details.
3.4.2
Setup Procedure
(1)
When the System Monitor starts, the System Monitor icon appears on the task bar. Double-click the Sys-
tem Monitor icon to display the System Monitor screen.
(2)
Click the tab of the item you want to check.
•
For details about the setup procedure, refer to the Setup Guide.
•
When an error/alert occurs, the color of the corresponding tab changes.
•
As for Device No. of SMART, [0] means Master or DISK0(HDD0) and [1] means Slave or
DISK1(HDD1).
System Monitor
+5.0V
Pass
+12V
Pass
VcoreA
Pass
SEE