Proface APL3000B - Node Box PC - Manual (Page 75)

PL3000 Series Reference Manual
3-14
3.3.3 When an Error Occurs
(1) A buzzer sounds and a pop-up message is displayed.
(2) An “
×” mark appears on the icon in the System Tray, which indicates an error status, and the icon blinks.
You can see the description of the error by double-clicking the icon.
• The Error Action is performed only one time when an error is detected for each monitoring item.
• To stop the buzzer, click the [Buzzer Off] button in the pop-up message dialog box.
If the pop-up message is hidden, click the [Buzzer Off] button displayed in the System Monitor
screen.
• You can also display the [System Monitor] screen by pressing [Show Window] on the pop-up
message window.
• When you check the [Show this message after an hour] check box and press the [OK] button, the
pop-up message window will close and will not open for an hour.
• Once an error is detected, the System Monitor holds the “error” status. (Icon
display indicating error detection) To recover from the error status, press the
[Reset] button on the System Monitor screen or turn off the PL. After that, perform
maintenance service for removing the cause of the error factor, and then turn on
the power again.
Icon display on start-ups Icon display when an error is detected.