Proface APL3000B - Node Box PC User Manual
Page 72
Advertising
Chapter 3 Installation and Wiring
3-5
(3)
Insert each of the fasteners, as shown. Be sure to
pull the fastener back until it is flush with the rear
of the attachment hole.
(4)
Use a Phillips screwdriver to tighten each fastener
screw and secure the PS-A in place.
• Tightening the screws with too much force can damage the PS-A unit’s plastic
case.
• The torque required to tighten these screws is 0.5 N•m.
Installation Panel
Hook
Advertising