Yokogawa Button Operated MV2000 - Manual (Page 102)

4-29
Commands
M-4662
1
2
3
4
5
6
7
App
Index
XJ Sets an RJC
To use the internal compensation circuit
Syntax XJ p1,p2<terminator>
p1
Measurement channel number
p2 Reference junction compensation
designation (INTERNAL)
Query XJ[ p1]?
Example Set the channel 001 RJC to the internal
compensation circuit.
XJ001,INTERNAL
To use an external RJC
Syntax XJ p1,p2,p3<terminator>
p1
Measurement channel number
p2 Reference junction compensation
designation (EXTERNAL)
p3 External RJC value (–20000 to 20000)
Query XJ[ p1]?
Example Set the channel 002 RJC to external and set the
compensation value to 0 μV.
XJ002,EXTERNAL,0
Description • Set parameter p1 according to the table in
section 4.3.
• The unit of parameter p3 is μV.
WU Sets environment settings
Setup items GENERAL,BATCH,DISPLAY,MESSAGE,INPU
T, ALARM,SECURITY,MEDIA,MATH,REPORT,
SERVICEPORT,DECIMALPOINT,POP3
General environment settings
Syntax WU p1,p2,p3<terminator>
p1
Setting type (GENERAL)
p2 Tag/channel number selection
TAG
CHANNEL
Channel number
p3 Language
ENGLISH
JAPANESE
CHINESE
GERMAN
FRENCH
KOREAN
Example Select tag display and set the language to
English.
WUGENERAL,TAG,ENGLISH
To set the batch function
Syntax WU p1,p2,p3,p4<terminator>
p1
Setting type (BATCH)
p2 Batch function ON/OFF
p3 Number of lot number digits (OFF, 4, 6, 8)
p4 Auto increment ON/OFF
Description Parameters p3 and p4 are valid only when p2 is
ON.
To set the display
Syntax WU p1,p2<terminator>
p1
Setting type (DISPLAY)
p2 Trend type (T-Y)
p3 Partial expansion ON/OFF
p4 Trend update rate switching ON/OFF
To set message settings
Syntax WU p1,p2,p3,p4<terminator>
p1
Setting type (MESSAGE)
p2 Method of writing messages from keys
COMMON Applied to all display groups
SEPARATE Applied to a specified display
group
p3 Power failure message ON/OFF
p4 Change message ON/OFF
To set the input
Syntax WU p1,p2<terminator>
p1
Setting type (INPUT)
p2 Detection of values exceeding the scale
FREE When the measurement range is
exceeded
OVER When ±105% of the scale is
exceeded
To set alarm settings
Syntax WU p1,p2<terminator>
p1
Setting type (ALARM)
p2 Alarm suppression function ON/OFF
To set security settings
Syntax WU p1,p2,p3<terminator>
p1
Setting type (SECURITY)
p2 Keys
OFF Disable security
KEYLOCK Lock the keys
LOGIN Enable the login function
p3 Communication
OFF Disable security
LOGIN Enable the login function
Set media settings
Syntax WU p1,p2,p3<terminator>
p1
Setting type (MEDIA)
p2 Auto save function ON/OFF
p3 Media FIFO ON/OFF
Example Use media FIFO.
WUMEDIA,ON,ON
Description Parameter p3 is valid only when p2 is ON.
4.6 Basic Setting Commands