Yokogawa µR10000 - Manual (Page 205)

IM 04P01B01-01E
9-22
9.12 Settng the Tmer Used n TLOG Computaton and Perodc Prntout
Reset
Selects whether to reset the TLOG computed value at each interval. The figure below
illustrates the reset operation for sum computation (TLOG.SUM).
Example: TLOG.SUM computaton
1 2 3
Reset Reset Reset
Reset: On
Timer timeout
Reset: Off
When reset is ON, the sum value is calculated over each interval. When set to Off, the
sum value from computation start is calculated.
Prnt
On: Prints the computed value every interval specified by the timer. Computation
channels set to Off do not apply.
Off: Does not print.