Yokogawa DAQWORX - Manual (Page 26)

2-2 IM WX13-01E
2.2 Starting and Exiting AddTrigger
Starting AddTrigger
Procedure
From the Windows Start menu, choose Programs > YOKOGAWA DAQWORX >
AddTrigger > Launcher.
The Launcher window appears.
Note
• The project that opens when AddTrigger is started is the project that was open the last time
you exited the program. If the file list was displayed the last time you exited the program, the
file list appears when you start the program this time.
• If the Use Password Protection check box is selected for the project, the Launcher starts
with password protection enabled. For the procedure for canceling the password protection,
see section 3.4.
• For instructions on how to switch the project, see section 2.3.
Exiting AddTrigger
Note
Disconnect AddTrigger from the data logging software before exiting the Launcher.
Procedure
1. Choose File > Exit, or click the X button in the right corner of the title bar.
If no other software programs are running, AddTrigger closes.
When Other Programs Are Running
If programs other than Launcher are running, the following dialog box opens.
2. Click Yes or No.
Yes: Save the current settings and exit AddTrigger. When AddTrigger is started
the next time, the current settings are restored.
No: Do not save the current settings, and exit AddTrigger.