Yokogawa DAQWORX - Manual (Page 32)

2-8 IM WX13-01E
2.4 Entering Data Logging Conditions
Entering the Host Name
2. Click the Server Host text box, then enter the host name of the PC running the
monitor server.
Entering the Port Number
3. If the server is DAQ32Plus, DAQLOGGER, or MXLOGGER, click the Port No. text
box and enter the port number.
If the server is DAQ32Plus, DAQLOGGER, or MXLOGGER, click the Select Port
Number button.
Port number selection button
A dialog box used to select the port number appears. Click the desired port
number.
The port number is entered in the text box.
Entering the System Number
The system number is used to identify data sources when more than one source is being
accessed by the monitor server. To determine whether a system number is required for
the monitor server being used, see the user’s manual for that monitor server.
4. Click the System No. text box and enter the number.
Retrieving and Displaying Host Information
5. Click Get Host Info.
The Information dialog box opens.
The user type, number of channels, scan interval, and scan start time are
displayed in the upper part of the Configuration dialog box.
If a connection could not be made to the monitor server, an error message dialog
box appears. Check the connection settings to confirm that they are correct.
Note
When you click Get Host Info., a connection is made with the monitor server, the following
information is downloaded, and then the connection closes.
• Channels
• Number of channels
• Scan interval • Scan start time
• Tag numbers • Tag comments
• Max./min. values • Units
• Server type • Alarm settings (level, type, value)