Yokogawa DAQWORX - Manual (Page 80)

4-20 IM WX13-01E
4.4 Using Cursors
Cursors can be used on the trend monitor, color graph monitor, circular monitor, and
alarm monitor.
• On the trend monitor, color graph monitor, and circular monitor, the measured data at
the cursor position can be read out.
• On the alarm monitor, you can specify the alarm log using the cursor and read the
measured data numerically at that point.
• When Link is turned ON, the cursor movement is reflected on the trend monitor, color
graph monitor, circular monitor, and alarm monitor.
There are two cursors, cursor A and cursor B.
The Cursor’s Value dialog box displays the measured data numerically at the positions of
cursor A and cursor B and the difference between the two.
Showing the Cursors and Reading the Values at the Cursor Positions
You can move the cursor when display updating of Data Monitor is paused.
Procedure
1. Click Pause on the toolbar or choose Pause from the File menu. The updating of
the display on the monitor screen is paused.
Pause
2. On the waveform display area, point to the position where measured data is to be
read and drag the mouse to the other position. The first position is cursor A; the
second position is cursor B.
Cursor A Cursor B
3. Click Display Cursor’s Value on the toolbar or choose Display Cursor’s Value
from the View menu.
Display Cursor's Value