Yokogawa DAQWORX - Manual (Page 51)

2-27 IM WX13-01E
Entering Settings (Launcher)
1
2
3
4
5
Index
6
2.5 Changing the Port Number Used by Data
Monitor
You can change the port number that Data Monitor uses. The new port number is
activated the next time AddTrigger is started.
The default port number is 50283.
If other applications are not using this port number, you do not have to change it.
Note
• Set a value different from port numbers that other applications use.
• This port number is not the port number used by the monitor server of the data logging
software. The port number that the monitor server of the data logging software uses is set in
“Setting the Connection Destination” in section 2.8.
• The port number cannot be changed while scanning is in progress.
Procedure
1. Choose File > Port No. for the internal communication. The Port No. for the
internal communication dialog box opens.
2. Enter the port number and click OK. The following message appears.
3. Click OK.
4. To activate the new port number, exit AddTrigger and restart it.