Regulatory compliance, Fcc warning (us only) – Brocade VDX 8770-8 Hardware Reference Manual User Manual
Page 115
Brocade VDX 8770-8 Hardware Reference Manual
95
53-1002564-04
Regulatory compliance
A
Regulatory compliance
This section describes the regulatory compliance requirements for the Brocade VDX 8770-8. It
contains the following standards:
•
•
“KCC statement (Republic of Korea)”
•
•
•
•
•
•
•
•
“Regulatory compliance standards”
FCC warning (US only)
This equipment has been tested and complies with the limits for a Class A computing device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
Connections
All non-conductive surfaces on the Brocade VDX 8770-8 must be
removed from all threads and connection points to ensure electrical
continuity.
Connections
Brocade VDX 8770-8 utilizes a two-hole compression type,
agency-approved crimped connector with a copper #2 American Wire
Gauge (AWG) that utilizes 20 inch pounds of torque to secure it to the
frame and EUT.
Input DC Voltage
The Brocade VDX 8770-8 is capable of operating at 200-240 V, 50/60
Hz at a maximum current level 16.0 A max., or -48VDC, 70.0 A max. per
power supply.
Thermal policy
Due to recent changes in the NEBS thermal policy testing procedures,
Brocade has made changes to the thermal policy for the Brocade VDX
8770-4. These changes include an additional fan speed (raising the
number of fan speeds to 5 from 4) and slightly altered trigger
temperatures. Additional non-user visible RASlog message generation
has also been included with this change to allow for easier debugging
and thermal history recording.
TABLE 26
NEBS installation requirements for the Brocade VDX 8770-8 (Continued)
Reference
Warning, requirement, or statement