Replacing an ac power supply, Figure 24, Removal and replace – Brocade VDX 8770-8 Hardware Reference Manual User Manual
Page 94
Advertising
74
Brocade VDX 8770-8 Hardware Reference Manual
53-1002564-04
Power supply removal and replacement
5
FIGURE 24
Removal and replacement of the power supply
Replacing an AC power supply
If you are not replacing the power supply, insert a filler panel into the slot.
For the following procedure, refer to
To replace a power supply, complete the following steps.
DANGER
High Touch Current. Earth connection essential before connecting supply (Brocade VDX 8770-8).
1. Unpack the new power supply and remove it from the anti-static bag.
2. Inspect the power supply for damage.
3. Ensure that the handle of the replacement power supply is pushed down.
4. Insert the power supply into the slot.
Advertising