Brocade Multi-Service IronWare QoS and Traffic Management Configuration Guide (Supporting R05.6.00) - Manual (Page 180)

166 Multi-Service IronWare QoS and Traffic Management Configuration Guide
53-1003037-02
show tm buffer-pool-stats slot
4
show tm buffer-pool-stats slot
Displays the maximum buffer utilization from the TM.
Syntax show tm buffer-pool-stats slot slot number
Parameters slot number The slot number specifies the decimal value of the slot from traffic manager.
Command
Modes
Privileged EXEC mode
Usage
Guidelines
The show tm buffer-pool-stats slot command displays the maximum buffer utilization from the TM
and provides additional information for debugging purposes.
Command
Output
The show tm buffer-pool-stats slot command displays the following information:
Examples The following example displays maximum buffer utilization:
Brocade#show tm buffer-pool-stats slot
--------- Ports 3/1 - 3/4 ---------
Maximum Buffer Size: 0 (0%)
Maximum Occupied Buffer Descriptors: 0 (0%)
--------- Ports 3/5 - 3/8 ---------
Maximum Buffer Size: 0 (0%)
Maximum Occupied Buffer Descriptors: 0 (0%)
History
Related
Commands
clear tm buffer-pool-stats slot slot number
Output field Description
Maximum Buffer Size Specifies the maximum buffer size in bytes for both gold and bronze traffic and also
shows the percentage of buffer used out of maximum packet buffer.
Maximum Occupied
Buffer Descriptors Specifies the maximum buffer pointers used for both gold and bronze traffic and also
shows the percentage of buffer pointers used out of total buffer points.
Release Command History
Multi-Service IronWare
R05.5c This command was introduced.