Brocade Multi-Service IronWare QoS and Traffic Management Configuration Guide (Supporting R05.6.00) - Manual (Page 27)

Multi-Service IronWare QoS and Traffic Management Configuration Guide 13
53-1003037-02
Rate limiting BUM packets
1
Table 6 describes the output parameters of the show rate-limit command.
TABLE 6 Output parameters of the show rate-limit command
Field Description
interface Shows the interface for which the BUM rate limit policy information is
displayed.
rate-limit input broadcast
unknown-unicast multicast Shows the average rate configured for the inbound broadcast,
unknown-unicast, and multicast traffic on the interface.
rate-limit input broadcast
multicast Shows the average rate and the port shutdown option configured for inbound
broadcast and multicast traffic on the interface.