Brocade Multi-Service IronWare QoS and Traffic Management Configuration Guide (Supporting R05.6.00) - Manual (Page 208)

194 Multi-Service IronWare QoS and Traffic Management Configuration Guide
53-1003037-02
Hierarchical QoS (HQoS) for 8x10G modules
5
Displaying HQoS Statistics
Use the show the hqos statistics command to display the specified flow information for a specified
interface.
Brocade# show hqos statistics ethernet 1/1 queue Queue name: Queue name:
vlan-business.Logical-Port1.Customer1.COS1
Priorities: 7, 6
EnQue Pkt Count 0
EnQue Bytes Count 0
DeQue Pkt Count 0
DeQue Bytes Count 0
Total Discard Pkt Count 0
Total Discard Bytes Count 0
Oldest Discard Pkt Count 0
Oldest Discard Bytes Count 0
Current Queue Depth 0
Maximum Queue Depth since Last read 0
Use the show the hqos statistics command to display flow information for the “other” traffic flows.
Brocade# show hqos statistics ethernet 1/1 queue default-other
Node: implicit_match_all Queue index: 0
Priorities: 0
EnQueue Packet Count 0
EnQueue Byte Count 0
DeQueue Packet Count 0
DeQueue Byte Count 0
Total Discard Packet Count 0
Total Discard Byte Count 0
Oldest Discard Packet Count 0
Oldest Discard Byte Count 0
Current Queue Depth 0
Maximum Queue Depth Since Last Read 0
Use the show the hqos statistics command to display flow information for the specified index.
Brocade#(config-if-e10000-2/1)#show hqos statistics ethernet 2/1 queue
LogicalPort1.CustomerGrp1.Customer1
Node: LogicalPort1.CustomerGrp1.Customer1 Queue index: 0
Priorities: 1,0
EnQueue Packet Count 0
EnQueue Byte Count 0
DeQueue Packet Count 0
DeQueue Byte Count 0
Total Discard Packet Count 0
Total Discard Byte Count 0
Oldest Discard Packet Count 0
Oldest Discard Byte Count 0
Current Queue Depth 0
Maximum Queue Depth Since Last Read 0
Node: LogicalPort1.CustomerGrp1.Customer1 Queue index: 1
Priorities: 3,2
EnQueue Packet Count 0
EnQueue Byte Count 0
DeQueue Packet Count 0
DeQueue Byte Count 0
Total Discard Packet Count 0