Lldp neighbors detail – Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual
Page 135
Multi-Service IronWare Switching Configuration Guide
105
53-1003036-02
Using LLDP
4
LLDP neighbors detail
The show lldp neighbors detail command displays the LLDP advertisements received from LLDP
neighbors.
The following shows an example show lldp neighbors detail report.
NOTE
The show lldp neighbors detail output will vary depending on the data received. Also, values that are
not recognized or do not have a recognizable format, may be displayed in hexadecimal binary form.
Port ID
The identifier for the port.
Brocade devices use the permanent MAC address associated with the port as the port ID.
Port
Description
The description for the port.
Brocade devices use the ifDescr MIB object from MIB-II as the port description.
System Name
The administratively-assigned name for the system.
Brocade devices use the sysName MIB object from MIB-II, which corresponds to the CLI
hostname command setting.
NOTE: A tilde (~) at the end of a line indicates that the value in the field is too long to display in
full and is truncated.
This field...
Displays...