Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 168)

138 Multi-Service IronWare Switching Configuration Guide
53-1003036-02
Deploying a LAG
5
Syntax: show statistics lag
Syntax: show statistics lag lag_name
Displaying multicast LAG member port usage
Use the show ip pim count lag command to display the multicast LAG member port usage. The
Forwarding entries correlate to the multicast (S, G) entries.
Brocade# show ip pim count lag lag-member-port
PORT ID FORWARDING ENTRIES
e2/43 0
e2/44 0
e2/45 0
e2/46 0
Syntax: show ip pim count lag lag-member-port
For IPv6, use the show ipv6 pim count lag lag-member-port command.
Enter a LAG member port in the lag-member-port parameter.
Displaying LAG information for a specified LAG name or
LAG ID
This show interface lag command displays LAG information of a LAG specified by the LAG name or
LAG ID. Detailed information about each LAG interface, including counters, is displayed.
Brocade# show interface lag lag1
Total number of LAGs: 1
Total number of deployed LAGs: 1
Total number of trunks created:1 (127 available)
LACP System Priority / ID: 1 / 0000.0001.c000
LACP Long timeout: 90, default: 90
LACP Short timeout: 3, default: 3
=== LAG "lag1" ID 123 (static Deployed) ===
LAG Configuration:
Ports: e 1/1 to 1/2
Port Count: 2
Primary Port: 1/1
Trunk Type: hash-based
Deployment: Trunk ID 123, Active Primary none, base fid: 0x0800
Port Link Port-State Dupl Speed Trunk Tag Priori MAC Name Type
1/1 DisabNone None None 123 No level0 0000.0001.c000
default-port
1/2 DisabNone None None 123 No level0 0000.0001.c000
default-port
LAG lag1 Counters:
InOctets 2237519128754 OutOctets 1050988054740
InPkts 1968838581 OutPkts 2030408443
InBroadcastPkts 0 OutBroadcastPkts 0
InMulticastPkts 0 OutMulticastPkts 0
InUnicastPkts 1968838581 OutUnicastPkts 2030448142
InDiscards 0 OutDiscards 0
InErrors 0 OutErrors 0
InCollisions 0 OutCollisions 0
OutLateCollisions 0