Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) User Manual
Page 481
Advertising
Multi-Service IronWare Switching Configuration Guide
451
53-1003036-02
RSTP support for PB and PBB
13
Configuring CE-2
C-VLAN Configuration
Configure a regular Layer 2 VLAN with 300 and add port 1/4 to it.
Brocade_CE-2(config)#vlan 300
Brocade_CE-2(config-vlan-300)#tagged ethernet 1/4
If RSTP needs to be enabled in CE bridges, the following configuration should be applied.
Configuring CE-1 and CE-2
RSTP Configuration
Brocade_CE-1(config)#vlan 300
Brocade_CE-1(config-vlan-300)#rstp
Advertising