Brocade Multi-Service IronWare Switching Configuration Guide (Supporting R05.6.00) - Manual (Page 540)

510 Multi-Service IronWare Switching Configuration Guide
53-1003036-02
Configuring MRP under an ESI VLAN
14
ethernet 1/2
Brocade(config-esi-customer1-vlan-100-mrp-1)# enable
Brocade(config-esi-customer1-vlan-100-mrp-1)# exit
Brocade(config-esi-customer1-vlan-100)# exit
Configuration considerations
The configuration considerations are as follows:
• MRP can be configured for vlans with encapsulation type B-VLAN, S-VLAN or C-VLAN.
• When MRP is configured for vlans under an ESI, the MRP members must be part of the same
ESI.