Led patterns – Brocade 300 Hardware Reference Manual User Manual
Page 26
FIGURE 5 Detailed View, Brocade 300 LEDs
A. System status LED (green/amber)
B. System power LED (green)
C. Link status LED
D. Link speed LED
E. Port status LED for port 3
F. Port status LED for port 7
LED patterns
The following table summarizes the state of the Brocade 300 LEDs as well as recommended user
responses.
Brocade 300 LED Patterns During Normal Operation
TABLE 1
LED Name
LED Color
Status of Hardware
Recommended Action
Power Status
No light
System is off or there is an internal
power supply failure.
Verify the system is on. If the
system is on, the unit is faulty.
Contact Technical Support.
Steady green
System is on and power supplies
are functioning properly.
No action required.
System Status
No light
System is off, boot is not complete,
or boot failed.
Verify the system is on and has
completed booting.
Steady green
System is on and power supplies
are functioning properly.
No action required.
LED patterns
26
Brocade 300 Hardware Reference Manual
53-1000862-06