Brocade Network Advisor SAN Installation and Migration Guide (Supporting Network Advisor 12.3.0) - Manual (Page 91)

Brocade Network Advisor SAN Installation and Migration Guide 75
53-1003158-01
Scalability limits
A
Scalability limits
The following tables summarize the scalability limits for support with Network Advisor.
Table 20 summarizes the SAN scalability limits for support with Network Advisor Enterprise edition.
TABLE 20 Enterprise-supported limits by SAN size
Small Medium Large
Number of Fabrics 8 16 36
Number of Switches and Access Gateways 40 90 200
Number of Switch Ports 2000 5000 15000
Number of Device Ports 5000 10000 20000
Performance Monitoring Polling 5 minutes 5 minutes 5 minutes
34568 HCM Agent discovery port TCP Used for HBA management via
JSON Server - Managed
Host Yes
55556 1 Launch in Context (LIC) client hand
shaking port TCP Client port used to check if a
Management application client
opened using LIC is running on
the same host
NOTE: If this port is in use, the
application uses the
next available port.
Client No
1. Port does not need to be open in the firewall for Professional edtion.
2. The default port number. You must use the same port number for all products or hosts managed by the Management server. This port is
configurable in the Management server; however, some products and firmware versions do not allow you to configure a port.
TABLE 19 Port usage and firewall requirements (Continued)
Port Number Ports Transport Description Communication Path Open in Firewall