LT Security LTN7616-HT (Hybrid) - Manual (Page 106)

User Manual of Digital Video Recorder
105
4. Set arming schedule of the channel.
Select Arming Schedule tab and set arming schedule of the channel.
Choose one day of a week and up to eight time periods can be set within each day. Set up arming schedule
of other days of a week. You can also use to copy an arming schedule to other days. Click
to save the settings.
Note: Time periods shall not be repeated or overlapped.
Figure 8. 4 Set Arming Schedule of Motion Detection
5. Click Linkage Action tab to set alarm response actions of motion detection (please refer to Chapter 8.6).
Figure 8. 5 Set Alarm Response Actions of Motion Detection
Click to save the settings. Click to complete the motion detection settings of the
channel.
6. If you want to set motion detection for another channel, repeat the above steps or just click in the
Motion Detection interface to copy the above settings to it.
Note: You are not allowed to copy the “Trigger Channel” action and motion detection settings to IP
camera.