Configuring redundant recording, 7 configuring redundant recording – LT Security LTN7616-HT (Hybrid) User Manual
Page 67
User Manual of Digital Video Recorder
66
5.7 Configuring Redundant Recording
Purpose:
Enabling redundant recording, which means saving the record files not only in the R/W (read/write) HDD but
also in the redundant HDD, will effectively enhance the data safety and reliability.
Note:
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD property
to Redundant. For detailed information, please refer to Chapter 10.3 Managing HDD Group. There should be at
least another HDD or network disk which is in R/W mode.
Steps:
1. Enter HDD Information interface.
Menu> HDD
Figure 5. 30 HDD General
2. Select the HDD and click
to enter the Local HDD Settings interface.
1)
Set the HDD property to Redundancy.
Figure 5. 31 HDD General-Editing
2)
Click
to save the settings.
3)
Click
to back to the upper level menu.
3. Enter the Record setting interface.
Menu> Record> Parameters
1)
Select Record.