Detecting bad sector, 7 detecting bad sector – LT Security LTN7616-HT (Hybrid) User Manual
Page 154
Advertising
User Manual of Digital Video Recorder
153
10.7 Detecting Bad Sector
Purpose: You can detect the bad sector of the HDD to check the status of the HDD.
Steps:
1. Enter the Bad Sector Detection interface.
Menu>Maintenance>HDD Detect>Bad Sector Detection
Figure 10. 21 Bad Sector Detection
2. Select a HDD and choose Full Detection or Key Area Detection as the detection type.
3. Click
to start detecting.
Figure 10. 22 Bad Sector Detecting
4. You can click
to pause the detection and click
to resume the detection.
5. If there is error information about the HDD, you can click
to view the information.
Advertising
This manual is related to the following products: