LT Security LTN7616-HT (Hybrid) - Manual (Page 37)

User Manual of Digital Video Recorder
36
Note: The dwell time of the live view configuration must be set before using Start Auto-switch. Refer to
Chapter 3.3 for dwell time settings.
Note: If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation is disabled;
you need to switch back to the Main output with the MAIN/AUX button and Enter button on remote control.
Figure 3. 1 Right-click Menu
3.2.2 Using an Auxiliary Monitor
Certain features of the Live View are also available while in an Aux monitor. These features include:
•
Single Screen: Switch to a full screen display of the selected camera. Camera can be selected from a
dropdown list.
•
Multi-screen: Switch different display layout options. Layout options can be selected from a
dropdown list.
•
Next Screen: When displaying less than the maximum number of cameras in Live View, clicking this
feature will switch to the next set of displays.
•
Playback: Enter into Playback mode.
•
Output Mode: Set the video output mode to Standard, Bright, Gentle or Vivid.
•
Main Monitor: Enter Main operation mode.
Note: In the live view mode of the main output monitor, the menu operation is not available while Aux output
mode is enabled.
3.2.3 Quick Setting Toolbar in Live View Mode
On the screen of each channel, there is a quick setting toolbar which shows when you click mouse on the
camera.
Note: Live View Strategy icon is only available for network cameras.