LT Security LTN7616-HT (Hybrid) - Manual (Page 160)

User Manual of Digital Video Recorder
159
11.3 Configuring Video Parameters
Steps:
1. Enter the Image Settings interface.
Menu > Camera > Image
Figure 11. 5 Image Settings Interface for Analog Camera
Figure 11. 6 Image Settings Interface for IPC
2. Select the camera to set image parameters.
3. Select the mode from the dropdown list of Mode. For analog cameras, four modes are selectable: Standard,
Indoor, Dim Light and Outdoor. While for network cameras, only Customize is supported.
4. Adjust the image parameters according to actual needs. The parameters are including Brightness, Contrast,
Saturation, Hue, Sharpness and Denoising. You can also click to restore the default settings.
Note: Sharpness, Denoising and restoring default settings are not supported by network cameras.
5. You can click to copy the image settings of the current camera to other analog cameras. Please refer
to step 7 of Chapter 11.1 Configuring OSD Settings.
Note: Copying the image settings to network cameras is not available.
6. Click to save the settings.