Install dvd, 2 install dvd – LT Security LTD2432MD User Manual

Page 12

Advertising
background image

DVR User Manual

6

2.1.2 Install DVD

Step 1: Unscrew and open the case. Then unscrew the screws in the both sides to take out of the upper iron bar as shown below:

Step 2: Install the DVD holder attached with the device. Please let the screw holes of the DVD aim at the holder’s. Try to place the

holder farther away from the front and then screw firmly. Then, put the DVD with the holder into the case and let the screw holes of

the case aim at the holder’s. Next, screw them firmly.

Step 3: Connect the power and data cables and install the upper iron bar. Then, screw firmly with screws in the both sides.

Note: If the user installs a DVD, he can only install 4 HDD disks due to the too much room taken up.

Advertising
This manual is related to the following products: