LT Security LTD2432MD - Manual (Page 60)

DVR User Manual
54
Step 5: Open IE browser, input IP address, or dynamic domain name and enter. If HTTP port is not 80, add the port number after IP
address or domain name.
Step 6: IE will download ActiveX automatically. Then a window pops up and asks for user name and password. Input name and
password correctly, and enter to view.
Note: If you cannot download and install ActiveX, please refer to Appendix A FAQ Q8.
2. Connect the DVR to internet directly.
Step 1: Enter into the DVR’s Main MenuSetupNetwork interface to enable PPPoE and then input user name and password
received from your ISP. Next, click ‘Apply’. The DVR will connect to the server and would give a confirmation message.
Step 2: When accessing the remote interface of DVR, user can input WAN IP to access directly (user can enter into Main
menuInformationNetwork interface to check IP address). The browser will download Active X control
Step 3: The following setting steps are as the same as Step4, Step 5 and Step 6 in Point 1.
Fig 7-1 View with IE browser