LT Security LTD2432MD - Manual (Page 19)

DVR User Manual
13
2. Change a mouse to try.
2.5.2 Use Mouse
In live: Double-click left button on one camera to be full screen display. Double-click again to return to the previous screen display.
Click right button to show the control bar at the bottom of the screen. Here are all control and setup. Click right mouse again to hide
the control bar.
In setup: Click left button to enter. Click right button to cancel setup, or return to the previous.
If you want to input the value, please move cursor to the blank and click. An input window will appear as Fig2.4. It supports digitals,
letters and symbols input.
Fig 2.4 Digital Numbers and Letters Input Window
Users can change some value by the wheel, such as time. Move cursor onto the value, and roll the wheel when the value blinks.
It supports mouse drag. I.e. Set motion detection area: click customized, hold left button and drag to set motion detection area. Set
schedule: hold left button and drag to set schedule time.
In playback: Click left button to choose the options. Click right button to return to live mode.
In backup: Click left button to choose the options. Click right button to return to previous picture.
In PTZ control: Click left button to choose the buttons to control the PTZ. Click right button to return to live.
Notice: Mouse is the default tool in all the operation below unless Exceptional indication.