LT Security LTD2432MD - Manual (Page 58)

DVR User Manual
52
6.3 Disk management
1. Format the disk
Step1: enter into disk management interface
Note: please format the hard disk before record. If not being formatted, it will show the status of the disk-free space, and
total space show OM at the bottom of screen.
Step2: click Refresh button to refresh the disk information of the list box; set the property of the disk then click Apply button to save
the setting
Step3: select a hard disk and click Format button to star format.
Note: all recorded files in the hard disk will be lost after formatted.
2.
Advanced
User may check model, S/N, firmware, health status of the disk in this interface. User also can monitor the temperature, internal
circuit, dielectric material of the disk, analysis the potential problems of the disk and warn so as to protect its data.
6.4 Upgrade
At present, it only supports USB update. Get the software from your vendor when there is a new software version, and make sure it
is corresponding with the DVR. User can check the USB information in Disk management.
Upgrade method: the user needs to copy the upgrade software which gets from vendor into the USB storage device and then
connect it to the USB port. Enter MenuUpgrade, the upgrade software name is displayed in the upgrade list box. Next, select that
software and then click upgrade button. It will upgrade automatically. Please wait for a while when the system is rebooted. Never
cut off power during upgrading.
6.5 Logoff
While clicking Log off icon, a log off dialogue box will popup. Then click OK button to log off. If user wants to log in again, click
icon to enter into user name and password to re-login.