Before drag after drag, Recycle record, Snap – LT Security LTD2432MD User Manual
Page 32: Schedule configuration, Schedule, 5 recycle record, 6 snap, 4 schedule configuration, 1 schedule
DVR User Manual
26
Before drag after drag
4.3.5 Recycle record
Step1: enter into system configurationrecord configurationrecycle record;
Step2: tick off recycle record to enable the recycle record function. It will cover the earlier recorded files and keep recoding when
HDD is full; if user disenables this function, it will stop recording when HDD is full.
Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current
interface.
4.3.6 Snap
In this interface, user can set up Resolution, quality, snap interval and snap number.
4.4 Schedule configuration
Schedule configuration includes three sub menus: schedule, motion and alarm.
4.4.1 Schedule
The volume means the seven days of a week from Monday to Sunday, the row means 24 hours of a day. Click the grid to do
relevant setup. Blue means checked area and gray means unchecked area.
Step1: enter into system configurationschedule configurationschedule; referring to Fig 4-15: